K-Patents PR-23 for K-Patents - Manual (Page 10)

Document/Revision No. IM-GB-PR23-ACP: Rev. 1.0 Effective: December 15, 2011
10
Appendix to the Instructions Manual PR-23
From Lab to Commercial Production
Off-line In-line
Process optimization and scale-up
Laboratory-scale
batches
Laboratory pilot-scale
batches
Full scale production
Figure 2.1 Test and validation equipment from laboratory to commercial production.
2.3 System components provided by K-Patents
2.3.1 Checklist of components
1 Pharma Refractometer PR-23-AC-62-HSS calibrated with raw measurement data
refractive index (nD) and temperature (T)
2
2a
Indicating transmitter DTR-M/U-GP-SC that calculates and displays the process liquid
concentration based on the refractive index and temperature, installed in a stainless steel
enclosure that contains a key
3
3a
Table top stand PR-7603-SS for Indicating transmitter, contains a set of two
M5x10 A2 DIN 912 screws
4 Wall mounting screws kit for mounting the Indicating transmitter DTR on the wall
5 Interconnecting cable between transmitter and sensor PR-8230
6 PR-8820 Crossover cable for Ethernet connection between Indicating transmitter and
computer, length 5 m (16 inch), contains cable gland for enclosure connection
7 Outer casing of Laboratory Test Cuvette LTC-HSS
8 PR-9254 O-ring, 21x2 EPDM
9 Compression spring
10 Sample chamber, static sampling
11 PR-9253 O-ring, 20.2x3 EPDM
12 Sample chamber, continuous sampling
13 2.5” EPDM sanitary gasket
14a
14b
2.5” Sanitary Clamp for the Laboratory Test Cuvette
2.5” Sanitary Clamp for the Pharma Refractometer PR-23-AC-62-HSS Sensor
15 PR-12151 Sample mixer
16 PR-12152 Mixer paddles, set includes 2 paddles
17 PR-10956 Universal power adapter for Sample mixer
18 Sample holder PR-1012
19 R.I. Liquid set PR-2300, consists of Cargille Certificate for the liquids
20 Memory stick with PR-23 Toolkit program PR-8890 (a standalone software that allows
data logging via a cross-over Ethernet cable)