K-Patents PR-23 for K-Patents - Manual (Page 16)

Document/Revision No. IM-GB-PR23-ACP: Rev. 1.0 Effective: December 15, 2011
16
Appendix to the Instructions Manual PR-23
2.8 Hardware and Software Requirements
PR-23 software is included in the Indicating Transmitter DTR and it includes:
● Automatic temperature compensation
● Sensor diagnostics and verification
In addition to software operation via the hardware, the DTR can be considered a web server
and is accessible via web-browser (e.g. Internet Explorer, Mozilla, Firefox etc.). The Ethernet
connection enables data download from an Indicating transmitter DTR to a computer. The
connection works both directly between DTR and computer, or via a hub or switch, local
area network (LAN), wireless network (WLAN) or fiber Ethernet. Any type of computer
(PC, Mac, PDA, mainframe...) with a compatible network connection can be configured
to download data from the DTR. See PROCESS REFRACTOMETER INSTRUCTION
MANUAL,
Section 12 for detailed instructions.
2.9 Mechanical and Electrical Requirements
Power supply for the refractometer is AC input 100-240 VAC/50-60 Hz, optional 24 VDC,
30 VA.
2.10 Sensor installation and system connections
Laboratory installation and key considerations for the site preparation
1. Physical dimensions of the instrument and accessories: Make sure there is enough
space to accommodate them.
2. Suitable recommended operational environment for the instrument and for the Cargille
Refractive Index Liquids should be maintained between 20 – 30 °C (68 – 86°F).
3. Utilities: 100-240 VAC/50-60 Hz (optional 24 VDC, 30 VA) electrical power supply,
computer network connection, fume hood if required and water supply.