Standard Horizon HX-100S - Manual (Page 33)

Page 33 HX100/HX150
8. MAINTENANCE
8.1 GENERAL
The inherent quality of the solid-state components in STANDARD HORIZON
radios will provide many years of continuous use. Take the following precau-
tions to prevent damage to the radio.

To prevent corrosion of electrical contacts and keep the water resistance,
keep the battery cover latched and the charge cover closed while boating.
 Never press the PTT switch unless an antenna or suitable dummy load is
connected to the antenna receptacle.
 Use only STANDARD HORIZON approved accessories and replacement
parts.
8.2 REPLACEMENT PARTS
Occasionally an owner needs a replacement part. Items can be ordered from
our Parts Department by writing or calling (in USA or Canada), or Standard
Horizon/Yaesu authorized dealers (outside USA or Canada).
YAESU USA
6125 Phyllis Drive, Cypress, California 90630
Telephone (800) 767-2450
Commonly requested parts, and their part numbers are listed below.
 Battery Cover: RA1425600
 CLIP-24 Belt Clip: RA1427500