Standard Horizon HX-100S - Manual (Page 18)

HX100/HX150 Page 18
Keypad
Key
Press the key to immediately recall channel 16 from any channel lo-
cation. Press and hold the key for two seconds to recall channel 9.
Press the 16/9 again reverts the transceiver back to the previously se-
lected working channel.
Key
Press to stop the Scan, Priority Scan, Dual or Tri-Watch feature.
Secondary use:
Press and hold the key for two seconds to recall the last-used NOAA
(National Oceanic and Atmospheric Administration) Weather Channel
from any channel location. Press the key again to recall the previ-
ously selected working channel.
Advanced use:
When the key is held and the key is pressed, the radio will
change the marine band between the USA, International, and Canadian
channels.
Key
Press key to toggle the transmitter output power between “High”
(5 Watts; HX150, 2.5 Watts; HX100) and “Low” (1 Watt) power. The
key does not function on the “Transmission Inhibited” and “Low power
only” channels.
Secondary use:
Hold down key to lock the keypad (except the , and PTT
keys) so that they are not accidentally changed. The “ ” Keylock icon
will appear at the top left on the display, to indicate that the functions are
locked. Hold down
key until the “ ” Keylock icon disappears to un-
lock the radio.
Key
Press key to change the operating channel, receiver volume level,
and squelch threshold level.
Pressing the key momentarily, the channel (or level) will increase
one step. Holding the key, the channel (or level) will increase rapidly.
Key
Press key to change the operating channel, receiver volume level,
and squelch threshold level.
Pressing the key momentarily, the channel (or level) will decrease
one step. Holding the key, the channel (or level) will decrease rapidly.