Standard Horizon HX-100S - Manual (Page 17)

Page 17 HX100/HX150
5. CONTROLS AND INDICATORS
5.1 CONTROLS AND INDICATORS
NOTE
This section defines each control of the transceiver. For detailed oper-
ating instructions, refer to section “ 6. BASIC OPERATION”.
ANTENNA
The antenna is permanently attached to the transceiver and can not be
removed.
PTT (PUSH-TO-TALK) Switch (Left Side Panel)
When pushed activates the transmitter.
LCD Display
This display shows current operating conditions, as indicated on the
page 20.