Standard Horizon HX-100S - Manual (Page 26)

HX100/HX150 Page 26
Wednesday sometime between 11 AM and 1 PM local time. You may use this
opportunity to test your transceiver periodically to confirm that the Weather
Alert feature is working, or for training crew members on how to configure
the transceiver to receive the NOAA Weather Alerts.
6.8 PRESET CHANNELS (0 ~ 9): INSTANT ACCESS
Ten user assigned channels can be programmed for instant access. Pressing
the
key activates the user assigned channel bank (Preset Channel Bank).
6.8.1 PROGRAMMING
1. Select the desired channel to be assigned into the Pre-
set Channel Bank using the or key.
2. Press and hold the key until the “ PRESET” icon
blinks at the left of the channel number on the display.
3. Press the or key to select the desired Preset
Channel (“P0” ~ “P9”).
4. Press the key to program the current channel into the Preset Chan-
nel Bank.
5. Repeat steps 1 through 4 to program the other channel into Preset Chan-
nels, if desired.
6.8.2 OPERATION
1. Press the key to recall the Preset Channel. The
“ PRESET” icon and Preset Channel Number will ap-
pear on the display.
2. Press the or key to select the desired Preset
Channel (“P0” ~ “P9”).
3. Press the key again to return to the last selected
channel. The “ PRESET” icon will disappear from the display.
6.8.3 Deleting a Preset Channel
1. Press the key to recall the Preset Channel.
2. Press the or key to select the Preset Channel
to be deleted.
3. Press and hold the key until the “ PRESET” icon is
blinking.
4. Press and hold the key until the selected channel
is deleted from the Preset Channel list.
5. Repeat steps 2 through 4 to delete the desired chan-
nels from Preset Channels “P0” ~ “P9”.
6. To finish the deleting the Preset Channel, press the key again to re-
turn to the last selected normal channel.