Standard Horizon HX-100S - Manual (Page 31)

Page 31 HX100/HX150
7. MENU (“SET”) MODE
The HX100/HX150’s Menu Mode allows a number of the HX100/HX150 op-
erating parameters to be custom-configured.
The Menu Mode is easy to activate and set, using the following procedure:
1. Turn the transceiver off by press and holding the key.
2. Press and hold the key, and then turn on the trans-
ceiver while still holding down the key.
3. After “ SET” icon appears on the display let go of both
keys.
4. The key when pressed scrolls through each menu
item:
LP - Lamp mode,
bP - key beep,
SC - Scan Mode,
dt - Dual watch or Tri-Watch mode,
AL - Weather alert
5. Press the or key will change the selection of the selected menu
item.
6. Press the key to save the menu selection.
7. After completing your adjustment, turn the transceiver off and on by
pressing and holding the key.
LP (LAMP MODE)
Function: Selects the Lamp illumination method for the LCD/Keypad.
Available Values: on / ky / oF
Default: kEY
on: Illuminates the LCD/Keypad continuously.
ky: Illuminates the LCD/Keypad for 5 seconds when any key is pressed.
oF: Turns off the backlight for the LCD and keys.
bP (BEEP)
Function: Enable/Disable the Keypad beeper.
Available Values: HI / Lo / oF
Default: HI
SC (SCAN TYPE)
Function: Selects the Scan mode.
Available Values: PS (Priority Scan) / MS (Memory Scan)
Default: PS (Priority Scan)