Uick, Eference, Uide – Standard Horizon HX-100S User Manual

Page 3

Page 3

HX100/HX150

uick

efeRence

uide

The HX100/HX150 is equipped with the E2O (Easy-To-Operate) menu system.

You can perform the basic operation in numerical order of the illustration below.

Press and hold the

key to turn on or off the radio.

Press the key (“

VOL” is displayed to the left of the channel number),

then press the

key to adjust the speaker audio volume.

Press the key twice (“

SQL” is displayed to the left of the channel

number), then press the

key to squelch or press the

key to un-

squelch the radio.

Press the

key to selects the operating channel.

Press the

key to toggle the transmit power between High (5 W:

HX150, 2.5 W: HX100) and Low (1 W). “

L” will be displayed on the LCD

when Low (1W) power is selected.

Press the key to recall channel 16.

Press and hold the key for two seconds to recall channel 9.

Press the key again to revert to the last selected channel.

Place your mouth about 1 inch (2.5 cm) away from MIC hole and speak

in a normal voice level while pressing the

PTT switch.

MIC Hole