Standard Horizon HX-100S - Manual (Page 30)

HX100/HX150 Page 30
6.11 TRI-WATCH
You may change the Dual Watch feature to Tri-Watch via the Menu (“Set”)
Mode. Refer to Menu Mode Item “ dt (DUAL WATCH MODE)” on page 33 for
details.
The Tri-Watch scans Channel 16, 9, and one other channel. When enabled,
a “ TW” icon will appear on the display when the Dual Watch feature is acti-
vated.
1. Press the / key to select the channel to scan along with Channel
9 and 16.
2. Press and hold the key for two seconds to activate
the TRI-Watch feature. “ TW” icon will appear on the
display when the Tri-Watch feature is activated.
3. When a transmission is received on the channel 16,
HX100/HX150 will stay on the channel 16 until the
incoming signal disappears.
4. When a transmission is received on the channel 9, the
HX100/HX150 will Dual watch between the channel 16
and channel 9.
5. When the HX100/HX150 receives a transmission on
the working channel, the HX100/HX150 will Tri-watch
between the working channel, channel 16, and channel
9.
6. To stop the Tri-watch feature and return to normal operation, press the
key.
t
ri
W
atch