Standard Horizon HX-100S User Manual

Page 28

HX100/HX150

Page 28

eMory

can

riority

can

Memory Scan: Scans the Scan Memory and channels

programmed into the Preset Channel

memory.

6. After completing your selection, turn the transceiver off and on by press-

ing and holding the

key.

6.9.3 OPERATION

The operation of the “Priority Scan” or “Memory Scan” is determined via the

section “

6.9.2 SELECTING THE SCAN TYPE”

6.9.3.1 Priority Scan
1. Press the key twice to activate the squelch level adjustment mode,

then press the

key until the background noise disappears.

2. Press the

key to start scanning, a “

SCN” icon and

blinking “

P” and “M” icons will appear on the display

during scanning.

3. When the

HX100/HX150 receives a transmission on a

working channel, it will stop on the working channel and

“Dual Watch” (described in next chapter) the priority

channel until the incoming signal disappears, then start

scanning again.

4. When the

HX100/HX150 receives a signal on the Prior-

ity channel it will stay on this channel until the incoming

signal disappears, then start Priority scanning again.

5. To stop the scanning, press the

key.