Ivoclar Vivadent Zenostar - Manual (Page 53)

53
Zenostar T/MO – Press-On Technique
Zenostar MO is pressed over with IPS e.max ZirPress
Tooth shade Zenostar disc IPS e.max ZirLiner IPS e.max ZirPress
A1 MO1 / T1 ZL clear A1
A2 MO1 / T1 ZL clear A2
A3 MO2 / T2 ZL clear A3
A 3.5 MO2 / T2 ZL clear A 3.5
A4 MO4 / T4 ZL clear A4
B1 MO1 / T1 ZL clear B1
B2 MO1 / T1 ZL clear B2
B3 MO3 / T3 ZL clear B3
B4 MO3 / T3 ZL clear B4
C1 MO1 / T1 ZL clear C1
C2 MO4 / T4 ZL clear C2
C3 MO4 / T4 ZL clear C3
C4 MO4 / T4 ZL clear C4
D2 MO4 / T4 ZL clear D2
D3 MO4 / T4 ZL clear D3
D4 MO4 / T4 ZL clear D4
BL1 MO0 / T0 ZL clear BL1
BL2 MO0 / T0 ZL clear BL2
BL3 MO0 / T0 ZL clear BL3
BL4 MO0 / T0 ZL clear BL4
If Zenostar T is used in combination with IPS e.max ZirPress HT, the framework should provide ideal structural support in order to
avoid any decreases in brightness, particularly in the fabrication of large-volume restorations. In such cases, the use of an ingot with
a lower translucency, e.g. LT, is recommended.