Ivoclar Vivadent Zenostar - Manual (Page 39)

39
Preparing for Stain and Glaze firing
Before the Stain and Glaze firing, the restoration has to be prepared as follows:
Finish the restoration using diamonds and give it a true-to-nature shape and surface texture, such as growth lines and convex/
concave areas.
Areas which should exhibit a higher gloss after the Glaze firing can be smoothed out and pre-polished using silicone discs.
Stain and Characterization firing
For the Stain and Characterization firing, please observe the instructions of the manufacturer of the respective veneering ceramic
system as well as the notes on the pages 55 and 56.
Glaze firing
For the Glaze firing, please observe the instructions of the manufacturer of the respective veneering ceramic system as well as the
notes on page 56.
Completely veneered and individually characterized Zenostar MO restoration