Ivoclar Vivadent Zenostar - Manual (Page 29)

29
Zenostar T – Monolithic restorations fabricated
in the Brush Infiltration and Staining Technique
In the Brush Infiltration Technique, the milled, non-sintered
Zenostar T restorations are brush-stained with Zenostar Color
Zr colouring liquids. After sintering, the restorations can be
completed with stains and glazes. In this way, highly esthetic
restorations with a gradual shade transition similar to that of
natural teeth can be fabricated with little extra effort.
Zenostar infiltration liquids
Brush-staining
For the Brush Infiltration Technique, Zenostar Color Zr Liquids in all the 16 A-D shades as well as 5 Effect shades (grey-violet, white,
ivory, brown, orange) are available. In order to simplify the infiltration procedure, Zenostar VisualiZr Indicator Solutions are offered.
They are available in 3 shades (red, blue, yellow) and can be added to the nearly colourless Zenostar Color Zr Liquids to make
infiltration of the restoration with colouring liquid visible. The exact mixing ratio is as follows:
We recommend adhering to the veneering ceramic shade scheme, i.e. using red for the body of the restoration, blue for the incisal
portion and yellow for areas such as fissures. Should the shade range not be sufficient, the colours can be mixed. Blue and yellow
mix to a deep green, for example.
Dispensing of Zenostar VisualiZr Dispensing of Zenostar Color Zr
Mixing ratio:
2 drops of VisualiZr Indicator Solution per 2 ml of Zenostar Color Zr Liquid