Ivoclar Vivadent Telio Lab - Manual (Page 5)

Product information
Material
Telio Lab
Telio Lab is a PMMA-based two-component
powder/liquid system for the cold poylmerization
in A-D shades. It is used for the fabrication of
temporary crowns and bridges.
Telio Lab exhibits excellent polishing properties and
thus a resulting smooth surface.
Stains and/or layering materials can be used to
apply final esthetic optimizations.
Relinings, add-ons, emergence profiles and
occlusal build-ups can be carried out with Telio Lab
(laboratory), Telio CS C&B (dental practice) or Telio
Add-On / Flow in both areas.
Telio Lab can be used in conjunction with different
processing techniques:
• Casting technique
• Injection technique
• Casting of temporary veneers for pre-ground
artificial teeth
5
Telio CAD
Telio CAD are cross-linked PMMA blocks for the
fabrication of long-term temporaries by means of
the CAD/CAM technique. As a result of the indus-
trial polymerization process, the blocks feature a
high material homogeneity. There is neither poly-
merization shrinkage nor an inhibited layer. Given
the CAD/CAM fabrication, the temporary can be
easily reproduced at all times. Stains and/or
layering materials can be used to apply final
esthetic optimizations.
Flexural strength [MPa] 90 ± 10
Modulus of elasticity [MPa] 3000 ±100
Water absorption [µg/mm 3 ] 26 ± 1
Water solubility [µg/mm 3 ] 0.8 ± 0.5
Physical properties in accordance with ISO 10477
Source: Ivoclar Vivadent R&D, Schaan/Liechtenstein, 2009
Flexural strength [MPa] 130 ± 10
Modulus of elasticity [MPa] 3200 ± 300
Water absorption [µg/mm 3 ] <28
Water solubility [µg/mm 3 ] < 0.6
In accordance with ISO 10477
Source: Ivoclar Vivadent R&D, Schaan/Liechtenstein, 2009
Pr
oduct
information