Ivoclar Vivadent Telio Lab - Manual (Page 35)

Indirect application – e.g. interdental characterization
– Telio Stains are applied under the Telio Lab LC layers.
– Apply the Stains in very thin layers of max. 0.2 mm with a brush or other suitable instrument.
– After that, light-curing is carried out with a customary curing light for 40 seconds (see page 45).
– Then the incisal edge is built up using the Telio Lab LC Transpa materials, and the anatomical shape is
completed. Do not exceed the maximum layer thickness of 2 mm.
– Telio Stains should have room temperature so that a smooth consistency is ensured.
– Do not expose Telio Stains to intensive light during application, since this shortens the processing
time.
Telio
Lab/T
elio
CAD
–
Cut-back
technique
with
Telio
Lab
LC
(light-curing)
35