Ivoclar Vivadent IPS e.max Ceram - Manual (Page 48)

48
Firing parameters for the Glaze firing – note the slow cooling!
If the gloss is unsatisfactory after the first Glaze firing, further Glaze firing procedures may be conducted using
the same firing parameters.
IPS e.max Ceram on Straumann ® B S t ➚ T H V 1 V 2 L
Anatomic IPS e.max ® Abutment °C/°F min °C/°F/min °C/°F min °C/°F °C/°F °C/°F
Stain firing 403/757 6:00 60/108 725/1337 1:00 450/842 724/1335 450/842
Glaze firing 403/757 6:00 60/108 725/1337 1:00 450/842 724/1335 450/842
IPS e.max Ceram on Straumann ® Anatomic IPS e.max ® Abutment – fabricated in the staining technique.