Ivoclar Vivadent IPS e.max Ceram - Manual (Page 22)

22
Before firing, carefully remove the framework with the applied and dried shoulder material
from the die and fire. Ceramic shoulder after firing. Compensate for the sinter shrinkage with the
2 nd Margin firing.
Firing parameters for the 1 st Margin firing (note the temperature control)
Important: IPS e.max Ceram Margin materials are only suitable for the application on IPS e.max ZirCAD and other
zirconium oxide frameworks and must not be used in conjunction with glass-ceramic materials.
IPS e.max Ceram on ZrO 2 B S t
➚
T H V 1 V 2
°C/°F min °C/°F/min °C/°F min °C/°F °C/°F
1 st Margin firing
403/
4:00
40/ 800/
1:00
450/ 799/
757 72 1472 842 1470