Ivoclar Vivadent IPS e.max Ceram - Manual (Page 38)

38
Before the application of the ZirLiner, clean the abutment with the steam jet. Do not blast with Al
2
O
3
or glass polishing beads.
Cover the entire abutment with the tooth-shaded or gingiva-shaded ZirLiner Place the abutment on a honey-combed firing tray for ZirLiner firing. Before firing, make sure
that the contact surface between the abutment and the implant is free from contamination.
Firing parameter for the ZirLiner firing
IPS e.max Ceram ZirLiner on Straumann ® B S t
➚
T H V
1
V
2
L
Anatomic IPS e.max ® Abutment °C/°F min °C/°F/min °C/°F min °C/°F °C/°F °C/°F
ZirLiner firing 403/ 757 4:00 40/72 960/1760 1:00 450/842 959/1758