Ivoclar Vivadent IPS e.max Ceram - Manual (Page 43)

43
Abutment
Technique
Before the application of the ZirLiner, clean the abutment with the steam jet. Do not blast with Al
2
O
3
or glass polishing beads.
Cover the entire abutment with ZirLiner. Place the abutment for ZirLiner firing on a honey-combed firing tray. Before firing, make sure
that the contact surface between the abutment and the implant is free from contamination.
The fired ZirLiner shows a homogeneous, silky-mat surface.
Firing parameters for the ZirLiner firing
IPS e.max Ceram ZirLiner on Straumann ® B S t ➚ T H V 1 V 2 L
Anatomic IPS e.max ® Abutment °C/°F min °C/°F/min °C/°F min °C/°F °C/°F °C/°F
ZirLiner firing 403/757 4:00 40/72 960/1760 1:00 450/842 959/1758