IHSE USA 437 Series DDXi DVI/VGA Extender - Manual (Page 55)

APPENDIX H: SPECIFICATIONS
55
Appendix H: Specifications
Power Requirements
Voltage PSU: 90..240VAC-0.5A-47..63Hz/
6VDC-2000 mA
Power required Local Unit: approx. 8W
Remote Unit without keyboard: approx. 8W
Remote Unit with keyboard: approx. 9.5W
Voltage PSU: 90..240VAC-0.5A-47..63Hz/5VDC-2400 mA
Power required Remote Unit USB port with multiple high power
devices, bus powered: approx. 10W
Interface
(Depending on type of device)
Monitor VGA (res.: 1600x1200@60Hz, plug&play
supported)
all lower resolutions at least with 75Hz
DVI (res.: 1600x1200@60Hz, plug&play
supported)
Local Access max. resolution DVI: 1600x1200,
VGA: 1280x1024
output depends on input type VGA or DVI
Keyboard/Mouse IBM PS/2 (power consumption <100mA)
USB USB 1.1 compatible (NO CD-Writer!)
USB-Remote 4 port Hub - low power (max 100mA each) or 1x
high power (max 500mA) without PSU. - high
power (max 500mA each) with additional PSU.
Maximum Length of Interconnection Cable
(Without reboost)
CAT5/5e/6 330ft (100m) with solid trunk cable
200ft (60m) with stranded cable
62.5µm/50µm Multimode 650ft (200m) @62,5µ
1300ft (400m) @50µ
9µm Singlemode 6 ¼ miles (10km)