IHSE USA 437 Series DDXi DVI/VGA Extender - Manual (Page 29)

DEVICE CONTROL
29
6. In many cases, after you have chosen a new setting, the OSD displays the
following confirmation message:
7. Highlight the Yes button and press the Enter key ( key on terminal or in
Windows program) to confirm your choice. Alternatively, highlight the No button
and press the Enter key ( key on terminal or in Windows program) to discard
the new setting and restore the previous value.
8. Select the Exit icon to close a submenu.
9. Press the Esc key ( key on terminal or in Windows program) to close the
OSD, saving all settings, and restore normal mouse and keyboard functions.
The following table summarizes the keyboard actions and icons used to navigate the
OSD utility, and to select and adjust the Extender’s parameters:
Key/Icon
Remote
Keyboard Terminal or
Windows
program
Action
Esc
Close the OSD, restore normal keyboard
and mouse functions.
Return to previous Menu selection.
Enter
Open the highlighted menu or submenu
Accept the highlighted command
Left arrow
Select the previous menu or command
icon
Decrease the highlighted parameter
Right arrow
Select the next menu or command icon
Increase the selected parameter