IHSE USA 437 Series DDXi DVI/VGA Extender - Manual (Page 25)

DEVICE CONTROL
25
4. Device Control
If you are using the DVI output from your video card and the DVI input to a TFT
monitor, no adjustment should be required. In other cases, when the video signal is
converted between analog and digital formats, either by the Local unit and/or the
monitor, you may need to optimize the video signal using the Extender’s on-screen
display (OSD).
Figure 9 OSD Utility
You can adjust the following properties using the OSD:
•
Adaptation to analog signal sources (VGA/RGB) – see also Monitor Setup,
page 36.
•
Color temperature
•
Brightness/contrast
•
Saturation
•
OSD operation, factory reset.
Version information
Screen resolution and
refresh rate
Main menu icons
Submenu/command icons
Menu title