IHSE USA 437 Series DDXi DVI/VGA Extender - Manual (Page 46)

DDXI DVI/VGA KVM EXTENDER FAMILY
46
Appendix B: Rack Mount Options
Extender units can be mounted in a 19” rack using the mounting kit:
DVI-KVM-Rackmount Kit
This contains the following parts:
Figure 26 Rack Mounting Kit
To mount a unit:
1. Align the holes on the base plate with the vacant screw holes on the base of the
extender unit.
2. Fasten the base of the unit to the plate of the mounting kit using the supplied
screws.
3. Close the remaining gaps with blanking plates.
Two small blanking plates
Narrow strip
Wide blanking plate
Base plate
M3x5 Screws (14)