IHSE USA 437 Series DDXi DVI/VGA Extender - Manual (Page 28)

DDXI DVI/VGA KVM EXTENDER FAMILY
28
4.2 Using the OSD
The OSD is an icon-based utility. The top line of symbols shows the main menu
categories:
Input Select
Specify whether the input is analog (VGA) or digital (DVI)
Scale Mode
Choose whether transmission occurs at the original screen resolution
(“transparent”) or the Extender imposes a fixed resolution.
Brightness – Contrast
Adjust brightness or contrast or reset to default values.
Color
Adjust color calibration, temperature, flesh/skin tone, hue and
saturation.
Image
VGA Input source only - Adjust pixel clock and phase.
Tools
Set OSD position and size, fixed scale sharpness, color depth,
factory reset.
1. Use the left and right arrow keys ( and keys on terminal or in Windows
program) to highlight the icon you want. The OSD displays additional icons
relating to commands in the selected menu category.
2. Press the Enter key ( key on terminal or in Windows program). The OSD
highlights the first command icon.
3. Use the Left and Right arrow keys ( and keys on terminal or in Windows
program) to highlight the command or submenu you want. In the case of the
latter, your selection will cause the OSD to display additional command icons
(Color Temperature commands, for example).
4. Press the Enter key ( key on terminal or in Windows program) to accept a
highlighted command. If this requires the increase or decrease of a value
(Contrast, for example), the OSD displays a value bar:
5. Use the Left and Right arrow keys ( and keys on terminal or in Windows
program) to change the value as required.
-
+