beautypg.com

Rod rigging – Harken 7410.10 MKIV Jib Reefing & Furling User Manual

Page 19

background image

Insert two cotter pins and

spread. Clean excess Loctite

®

from terminal body using

special care to ensure that

there is no red Loctite

®

on

threaded stud.

Assembly

Rod Adapter Stud

Apply a few drops of red

Loctite

®

to threads of nosepiece.

Screw main threaded stud

portion onto bronze nosepiece

until flats align with two cotter

pin holes in terminal body.
Tip: Turn nosepiece completely

into threaded stud portion.

Flats will be close and may

only require a small half turn

to align with cotter pin holes.

ROD RIGGING

MKIV Unit 0

19

This manual is related to the following products: