Harken 7410.10 MKIV Jib Reefing & Furling - Manual (Page 12)

Assembly Top foil
Lay top foil in line with others. Slide stay
into top foil and down the line of foils or
slide each foil up stay.
12 MKIV Unit 0
Cut out template at right. Line template up
with top of foil and scribed line. Tape in
place. Use a center punch to mark holes.
Check center punch marks to confirm
they are 3 /
16
" (5 mm) and .8" or 13 /
16
"
(20 mm) from top of foil.
Drill two (2) 1/8" (3.2 mm) holes for
trim cap.
3 / 16 " (5mm)
.8" or 13 / 16 "
(20mm)
Foil To
p
!