Guralp Systems CMG-3ESPCD - Manual (Page 75)

CMG-3ESPCD Digital Broadband Seismometer Command line interface
6.7.15 GO
Syntax: GO
Closes terminal mode, and begins any download that you have set up. You
can pause the download by re-entering terminal mode, and restart with
another GO or abort with END­DOWNLOAD. Once the download has completed,
the digitiser will carry on transmitting real-time data, if you have so
configured it.
6.7.16 END-DOWNLOAD
Syntax: END­DOWNLOAD
Aborts any downloads which were in progress at the time you entered
terminal mode.
6.7.17 DISKMENU
Syntax: DISKMENU (interactive)
Allows you to select various options for downloading data over the optional
FireWire interface. When you issue this command you will see the message
Plug in FireWire cable
and the digitiser will wait for you to plug in a compatible disk. When it
detects one, it will print out information about the disk:
FireWire Connection *BR
Node: FFC1 #Nodes 2
Reading Node FFC0 .
LaCie Group SA
1394-IDE Rev B2
LaCie DATA BANK drive LUN 0
Logging on @AgentCSR= 0010:00000
Capacity 39.0GB
Press a key for options else
7 seconds to automatic disk backup
At this point, pressing a key will cause the digitiser to bring up an options
menu and pause. If you do not press a key within 7 seconds, the disk will be
automatically backed up.
MAN-C3E-0002 75 Issue B - November 2013