Guntermann & Drunck TripleMUX - Manual (Page 30)

Guntermann & Drunck GmbH Installation and operating manual
TripleMUX/QuadMUX
Select the field to be edited using the arrow keys or using the mouse, after you
have logged onto the system using the master password.
The master can also edit the greyed out fields as well:
H o t Scene Name A B C D
1 001 1 1 1 1
The previous entry can simply be overwritten.
Based on the connection diagram shown above, an edited Video Scene menu
is given below with explanations of the changes resulting from this.
V i d e o S c e n e T r i p l e M U X
S c e n e N a m e A B C D
1 a1b1c1PC1 1 1 1 1
2 a3b3c3PC3 2 2 2 2
3 a3b2c4PC2 3 3 3 3
4 a3b1c1PC3 4 4 4 4
...
8 008 4 4 4 4
Esc Enter F1: Save
This setting gives the following:
A B C D
1 1 1 1 Image from PC 1 on monitor A,B,C
3 3 3 3 as before, but with PC3
3 2 4 2 Monitor A = image V3.1 from PC3
Monitor B = image V2.2 from PC2
Monitor C = image V4.3 from PC4
Monitor D = image V2.4 from PC2
3 1 1 2 Monitor A = image V3.1 from PC3
Monitor B = image V1.2 from PC1
Monitor C = image V1.3 from PC1
Monitor D = image V2.4 from PC2
The table shows that only ever one PC used for operation is included
in a scene if it is visible on at least one monitor.
This procedure should still be followed to prevent accidental inputs on
computers which are not visible.
The HotKeys assigned to the scenes cannot be changed in the SCENE
CONFIG menu. If you want to use another group of HotKeys, open the
Console Setup menu (see
chap. 5.2.2.13 )
To save the settings, close the menu using
F1 .
Page 30