Guntermann & Drunck TripleMUX - Manual (Page 13)

Guntermann & Drunck GmbH Installation and operating manual
TripleMUX/QuadMUX
4.2 Keyboard HotKey switching
4.2.1 Default setting
To switch, hold down the
CRTL key and then press the NUM key of the
required scene. Permissible keys are the alphanumeric characters above the
letter block from 1 - 8.
Selection of computer 1: CTRL + 1
The default setting begins with 1 and ends with 8.
4.2.2 Customer setting
Master function
Both the first and the second key of the HotKey combination can be modified
according to your requirements
(see chap. 5.2.2.11 + 5.2.2.13).
If the default setting has been lost or if changes are required, the settings can
be requested from your system administrator.
4.3 AdonIS scene switching
4.3.1 Initiating the AdonIS
The AdonIS is initiated by holding down the
CRTL key and also holding down
the NUM key.
If the you changed the HotKey from the default setting of CRTL ( chap.
5.2.2.11 ), this new HotKey will also be the first key for initiating the AdonIS.
The second key for initiating the AdonIS (NUM) , cannot be
changed.
The SELECT SCENE window appears on the screen, where 8 possible scenes
will be displayed.
Whether the scene in question assigned to the computer is switched on or off is
indicated by the colour display in the corresponding line in the menu:
green: Computer switched on
red: Computer switched off or port not occupied
Page 13