Guntermann & Drunck TripleMUX - Manual (Page 19)

Guntermann & Drunck GmbH Installation and operating manual
TripleMUX/QuadMUX
• English UK
• French
After moving the cursor to the KEYBOARD LAYOUT field you can use the
SPACE key (toggle) to select the required option.
5.2.2.3 ScreenSaver
The ScreenSaver to be set here is generated by the TripleMUX and bears no
relation to the ScreenSaver on the computer.
As there is normally only an indirect connection (via the TripleMUX) between
the computer and the monitors, you should switch off the computer
ScreenSaver to make your work easier.
The ScreenSaver on the TripleMUX carrys out this task; it switches the monitor
to the power-down mode.
Move the cursor to the ScreenSaver row. The existing entry can be
overwritten, or can be edited by pressing the
ENTER key.
A time of 1 - 60 minutes is permissible. The input "0" sets the ScreenSaver to
"OFF".
ENTER completes the entry.
To save the settings, close this menu with F 1 .
5.2.2.4 Auto logoff
This setting can be used to activate an automatic LOGOFF from the system.
The automatic LOGOFF takes you back to the LOGIN screen, in the same way
as the manual option (
F8 key).
This means that the system is not protected against unauthorised access and
only once the password is entered in the LOGIN window is it possible to access
the computer again (only valid if the OPEN ACCESS has been deactivated).
The time for triggering the automatic LOGOFF is set by moving the cursor to
the Auto Logoff row. The existing entry can be overwritten, or can be edited by
pressing the
ENTER key.
A time of 1 - 60 minutes is permissible. Entering "0" switches the logout to
"OFF".
ENTER completes the entry.
To save the settings, close this menu using F 1 .
Page 19