Guntermann & Drunck TripleMUX - Manual (Page 28)

Guntermann & Drunck GmbH Installation and operating manual
TripleMUX/QuadMUX
5.2.4 Setting the video scenes
5.2.4.1 Explanation
Opening the Video Scene menu will switch the monitors to dark and only the
menu will be visible on the monitors.
In the Video Scene menu you define video scenes to be switched to your
workstation screen. Video scenes are monitor sequences which you can
configure as you wish. In this process you define for which video scene a video
source on a multi-graphic computer is to be switched to a specific monitor on
your workstation.
Open the AdonIS for the TripleMUX using the HotKey combination you have
set or using the default HotKey
CRTL + NUM .
In the open AdonIS ("Select Scene" menu), press the F5 key.
In the open window there will be up to eight scenes available.
V i d e o S c e n e T r i p l e M U X
S c e n e N a m e A B C D
1 001 1 1 1 1
2 002 2 2 2 2
3 003 3 3 3 3
4 004 4 4 4 4
...
8 008 4 4 4 4
Esc Enter F1: Save
Column 1: HotKey for immediate selection
Column 2: Scene designation (can be edited; 13 characters)
Column 3: VGA allocation matrix
The menu displayed reflects the default setting. Four computers, each with 1
quad video card has been assumed here. The three pieces of image
information per computer are placed 1:1 on the video outputs A, B, C + D of the
TripleMUX.
Example scene 1 (equivalent to default scene 1)
H o t Scene Name A B C D
1 001 1 1 1 1
Scene key for this scene: 1
Scene designation:
001
Image on monitor A: A1 from TripleMUX = CPU 1 from PC1
Image on monitor B: B1 from TripleMUX = VGA CPU 1.2 from PC1
Image on monitor C: C1 from TripleMUX = VGA CPU 1.3 from PC1
Image on monitor D: D1 from TripleMUX = VGA CPU 1.4 from PC1
Page 28