Guntermann & Drunck TripleMUX - Manual (Page 23)

Guntermann & Drunck GmbH Installation and operating manual
TripleMUX/QuadMUX
5.2.2.13 Defining the second key (Scene Key)
The second button on the HotKey for triggering the scene switchover can also
be modified. Proceed in the same way as the process described to change
Hotkey1.
The following alternatives are available, and it is only possible to select groups
of buttons:
• numerical 0 ..9 (default)
• numerical (NUM block) 0 .. 9
• alphabetical A .. K
Once you have made the relevant changes, your new HotKey for scene 2, for
example could look like this:
WIN + B .
5.2.2.14 Setting the QuickAccess
Within the scene config ( see chap. 5.2.4) there is the option of setting
permanent scenes. Each video scene is also permanently assigned to the
operation of a specific computer with keyboard + mouse.
The QuickAccess function allows you to switch the keyboard and mouse
back and forth freely between the computers shown on the monitors. This
means that the scene does not necessarily have to be closed to be able to
operate another computer. The switchover is carried out by pressing the
Hotkey and at the same time pressing the Accesskey.
Default: CRTL + F1 (to F10)
Move the cursor to the QuickAccess option in the Console Setup menu.
By pressing the SPACE key you can then
enable the QuickAccess: Yes
or block: No (default)
ENTER confirms the change. To save the settings, close this menu using F 1 .
Page 23