Grandstream GXW42xx User Manual - Manual (Page 7)

FIRMWARE 1.0.5.8 GXW42XX USER MANUAL PAGE 5 OF 62
CHANGE LOG
This section documents significant changes from previous versions of GXW42XX user manuals. Only
major new features or major document updates are listed here. Minor updates for corrections or editing
are not documented here.
CHANGES FROM 1.0.5.5 USER MANUAL

Added option [ SIP REGISTER Contact Header UsesUse Request Routing ID in SIP Headers ] for Profile 1-
4 to support NAT transfer feature.
CHANGES FROM 1.0.4.24 USER MANUAL

Added option [ Enable Fast RFC2833 ] to set DTMF duration by RFC2833.

Added SNMP support. Added [ SNMP ] section.

Added QoS settings for SIP and RTP packets. Rearranged options [ Layer 2 QoS Settings ], and [ Layer
3 QoS Settings ].

Added star code [ *98 ] to play registration ID

Added star code [ *99 ] to trigger provisioning process.

Added option to download [ XML ] format device configuration file.
CHANGES FROM 1.0.4.17 USER MANUAL

Added support for audio codec G.722

Added option [ Always send HTTP Basic Authentication Information ] to enable sending HTTP
authentication without server challenge

Added the options to enable/disable [ Use P-Preferred-Identity Header ] and [ Use Privacy Header ]

Added the options to enable/disable [ Do Not Escape '#' as %23 in SIP URI ]
CHANGES FROM 1.0.4.9 USER MANUAL

Added option [ Use Request Routing ID in SIP Headers ] to enable/disable device to use configured
Request URI Routing ID for certain FXS port in its SIP message Header when a trunk SIP account is
used.

Added option [ Add Auth Header on Initial REGISTER ] to enable/disable including authentication header