Grandstream GXW42xx User Manual - Manual (Page 33)

FIRMWARE 1.0.5.8 GXW42XX USER MANUAL PAGE 31 OF 62
CONFIGURATION GUIDE
CONFIGURING GXW42XX VIA VOICE PROMPT
DHCP M ODE
Select voice menu option 001 to enable GXW42XX to use DHCP.
STATIC IP M ODE
Select voice menu option 001 to enable GXW42XX to use STATIC IP mode, then use option 002, 003,
004, 005 to set up IP address, Subnet Mask, Gateway and DNS server respectively.
PPP O E M ODE
Select voice menu option 001 to enable GXW42XX to use PPPoE mode.
F IRMWARE S ERVER IP A DDRESS
Select voice menu option 013 to configure the IP address of the firmware server.
C ONFIGURATION S ERVER IP A DDRESS
Select voice menu option 014 to configure the IP address of the configuration server.
U PGRADE P ROTOCOL
Select voice menu option 015 to choose firmware and configuration upgrade protocol. User can choose
between TFTP, HTTP, and HTTPS.
F IRMWARE U PGRADE M ODE
Select voice menu option 017 to choose firmware upgrade mode among the following three options:
1) Always check, 2) check when pre/suffix changes, and 3) never upgrade
CONFIGURING GXW42XX WITH WEB BROWSER
The GXW42XX series gateway has an embedded Web server that allows users to configure the
GXW42XX through a web browser. It has language support to English, Chinese, French, and Spanish.