Grandstream GXW42xx User Manual - Manual (Page 23)

FIRMWARE 1.0.5.8 GXW42XX USER MANUAL PAGE 21 OF 62
BASIC OPERATIONS
UNDERSTANDING GXW VOICE PROMPTS
GXW42XX has a built-in voice prompt menu for simple device configuration. To enter the voice prompt
menu, press *** on the standard analog phone which is connected to device’s FXS port.
TABLE 5: DEFINITIONS OF THE GXW VOICE PROMPTS
Menu Voice Prompt User’s Options
Main Menu “Enter a Menu Option” Enter “*” for the next menu option
Enter “#” to return to the main menu
Enter “001 – 005,007, 010, 013 - 017,047, 086 or 099” Menu
option
Enter “9” for confirming an option
001 “DHCP Mode”,
“PPPoE Mode” or “Static IP
Mode”
Enter ‘9’ to toggle the selection
If user selects “Static IP Mode”, user need configure all the IP
address information through menu 002 to 005. If user selects
“Dynamic IP Mode”, the device will retrieve all IP address
information from DHCP server automatically when user reboots
the device.
002 “IP Address “ + IP address The current WAN IP address is announced
Enter 12-digit new IP address if in Static IP Mode.
003 “Subnet “ + IP address Same as Menu option 002
004 “Gateway “ + IP address Same as Menu option 002
005 “DNS Server “ + IP address Same as Menu option 002
007 Preferred Vocoder Enter “9” to go to the next selection in the list:

PCM U

PCM A

iLBC

G-726

G-723

G-722

G-729
010 “MAC Address” Announces the Mac address of the unit.
013 Firmware Server IP
Address
Announces current Firmware Server IP address. Enter 12 digit
new IP address.
014 Configuration Server IP Announces current Config Server Path IP address. Enter 12 digit