Grandstream GXW42xx User Manual - Manual (Page 42)

FIRMWARE 1.0.5.8 GXW42XX USER MANUAL PAGE 40 OF 62
Self-Defined Time
Zone
This parameter allows the users to define their own time zone. For syntax and examples,
please refer to user manual.
Syslog
Syslog Server The IP address or URL of System log server. The server collects system log information from
the device.
Syslog Level Select the GXW42XX to report the log level. Default is NONE. The level is one of DEBUG,
INFO, WARNING or ERROR. Syslog messages are sent based on the following events:
1. product model/version on boot up (INFO level)
2. NAT related info (INFO level)
3. sent or received SIP message (DEBUG level)
4. SIP message summary (INFO level)
5. inbound and outbound calls (INFO level)
6. registration status change (INFO level)
7. negotiated codec (INFO level)
8. Ethernet link up (INFO level)
9. SLIC chip exception (WARNING and ERROR levels)
10. memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it contains the
following components:
GS_LOG: [device MAC address][error code] error message
Example: May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000] Ethernet link is
up
Print SIP in
Syslog
Enable or disable printing of full SIP messages in Syslog.
TABLE 9: ADVANCED SETTINGS
Ring Tones
System Ring
Cadence
Configuration option for all FXS ports ring cadence for all incoming calls.
(Syntax: c=on1/off1-on2/off2-on3/off3; [...]) Default is set to c=2000/4000; (US standards)
Call Progress
Tones
Using these settings, user can configure tone frequencies according to user preference. By
default, the tones are set to North American frequencies. Frequencies should be configured
with known values to avoid uncomfortable high pitch sounds. ON is the period of ringing (ON