Grandstream GXW42xx User Manual - Manual (Page 54)

FIRMWARE 1.0.5.8 GXW42XX USER MANUAL PAGE 52 OF 62
SRTP Feature Default is Yes, and star code is Enable-16, Disable-17.
SRTP per call
Feature
Default is Yes, and star code is Enable-18, Disable-19.
CID Feature Default is Yes, and star code is Enable-31, Disable-30.
CID per call
Feature
Default is Yes, and star code is Enable-82, Disable-67.
Direct IP calling
Feature
Default is Yes, and active star code is 47.
CW Feature Default is Yes, and star code is Enable-51, Disable-50.
CW per call
Feature
Default is Yes, and star code is Enable-71, Disable-70.
Call return Feature Default is Yes, and active star code is 69.
Unconditional
forward Feature
Default is Yes, and star code is Enable-72, Disable-73.
Busy forward
Feature
Default is Yes, and star code is Enable-90, Disable-91.
Delayed forward
Feature
Default is Yes, and star code is Enable-92, Disable-93.
Paging Feature Default is Yes, and active star code is 74.
DND Feature Default is Yes, and star code is Enable-78, Disable-79.
Blind Transfer
Feature
Default is Yes, and active star code is 87.
Disable LEC per
call Feature
Default is Yes, and active star code is 03.
3WC Feature Disable Bellcore-style 3-Way Conference default is No. If set to Yes, flash on 2 nd line will not
bring 2
nd
line in to the conference with 1
st
line. Instead, flash will switch between lines.
Star Code 3WC Feature default is Yes.
3WC active star code is 23.
Provision start
Feature
Default is Yes, and active star code is 99.