Grandstream GXW42xx User Manual - Manual (Page 13)

FIRMWARE 1.0.5.8 GXW42XX USER MANUAL PAGE 11 OF 62
FIGURE 1: DIAGRAM OF GXW4216/24/32/48 PANEL
TABLE 1: DEFINITIONS OF THE GXW CONNECTORS
Ethernet port Connect to the internal LAN network or router
RESET Factory Reset button. Press and hold for a while to reset factory default settings.
DC IN Power adapter connection
Analog port Connect to analog phones / fax machines with an RJ21 to RJ11 cable
FXS ports FXS port to be connected to analog phones / fax machines.
Note: Once the GXW42XX is turned on and configured, the front display panel indicates the status of the
unit.
TABLE 2: DEFINITIONS OF THE GXW DISPLAY PANEL
Act LED Remains ON if plug the network cable.
LINK LED Indicates Ethernet port activity.
FXS LED Indicate status of the respective FXS Ports on the back panel
Busy - ON (Solid Green)
Available - OFF
Slow blinking FXS LEDs indicates Voice Mail for that port.
All FXS LEDs slow blinking indicates provisioning.