Grandstream GXW42xx User Manual - Manual (Page 36)

FIRMWARE 1.0.5.8 GXW42XX USER MANUAL PAGE 34 OF 62
access settings can be set here.

PROFILE - AUDIO SETTINGS: DTMF, Vocoder, and Analog Line settings can be configured here
for each port.
Additional functions available to administrators are:

MAINTENANCE: Full settings for network, upgrade/provisioning, TR-069, Security and Syslog.

ADVANCED SETTINGS: To set advanced Ring Tongs, FXO Failover, and System Features.

PROFILE X: To configure each of the SIP accounts.

FXS PORTS: To configure each of the FXS ports and Hunting Groups etc.
TABLE 7: STATUS
System Info
Product Model Contains the product model info.
Part Number Product Part Number.
Software Version Program: This is the main software release. This number is always used for firmware upgrade.
current version is 1.0.5.8.
Boot: current version is 1.0.5.1.
Core: current version is 1.0.5.5.
Base: current version is 1.0.5.4.
System Up Time Shows system uptime since the last reboot.
System Time The time according to NTP server.
Service Status Shows the status of the VOIP applications.
Network Status
MAC Address The device ID in hexadecimal format. This is needed for Internet Service Provider
troubleshooting. The MAC address will be used for provisioning and can be found on the label on
original box and on the label located on the bottom panel of the device.
IP Address Mode Shows the current IP mode.
IP Address Shows IP address of GXW42XX.
Subnet Mask Shows Subnet Mask of GXW42XX.
Gateway Shows Default Gateway of GXW42XX.
DNS Server Shows DNS Server of GXW42XX.