Grandstream GXW42xx User Manual - Manual (Page 40)

FIRMWARE 1.0.5.8 GXW42XX USER MANUAL PAGE 38 OF 62
Periodic Inform
Interval
Frequency that the inform packets will be sent out to the ACS
Connection
Request
Username
The user name for the TR-069 Auto Configuration Server to connect to the phone.
Connection
Request
Password
The password for the TR-069 Auto Configuration Server to connect to the phone.
SNMP
SNMP
enable/disable
Default is No.
Trap Community Configure the name of SNMP trap community
IP Address Configure the SNMP trap destination IP.
Port Default is 162. Change to configure the SNMP trap destination port .
Version Choose the SNMP version of the trap.
Trap interval Default is 5 sec. Change to configure the time interval between traps.
Download MIB Download the Management information base file.
Security Settings
SIP TLS
Certificate
The GXW42XX series supports SIP over TLS. It has built-in private key and SSL certificate.
The user specified SSL certificate used for SIP over TLS is in X.509 format.
SIP TLS Private
Key
You may also customize the SIP TLS Private Key. The user specified SIP TLS private key
used for SIP over TLS is in X.509 format.
SIP TLS Private
Key Password
SSL Private key password used for SIP Transport in TLS/TCP.
Primary RADIUS
Server
Remote Authentication Dial In User Service (RADIUS). GXW42XX supports RADIUS for
authentication, authorization and billing purposes. Primary and secondary RADIUS server
configurations are available to provide redundancy to this feature. In case Primary Radius
server becomes unusable, RADIUS requests will be automatically sent to the secondary
server. When at least one RADUIS server was configured, the device will allow users to make
phone calls only after authorization from RADIUS server has been received. CDR (Call Detail
Record) is also sent to the RADIUS server for billing purposes. RAIDUS server can send
requests to terminate calls when run out of pre-paid credit.