Denon ADV-M71 - Manual (Page 89)

ENGLISH
89
• If the times set for the everyday timer and once timer overlap, the once time has priority.
(4) Everyday timer and once timer priority
2 Checking the timer settings
• Use the same procedure as when setting the timer to check the timer settings.
q Press the MENU/SET button to display “TIMER”.
w Turn the SURROUND/SELECT knob to display “EVERYDAY” or “ONCE”.
e The display switches between the set function, start time, stop time and timer standby indicator each time the MENU/SET button is pressed.
r The display returns to as it was before the everyday timer or once timer was set about 4 seconds after the timer standby indicator is
displayed.
2 Changing the timer settings
• Reset the timer from the start using the desired settings.
The new settings overwrite the previous settings.
• To change a setting during the process of setting the timer, press the stop button ( 2 ) to return to the “EVERYDAY” or “ONCE” display, then
redo the operation from there.
2 Clearing the timer settings
q Press the MENU/SET button to display “TIMER”.
w Turn the SURROUND/SELECT knob to display “EVERYDAY” or “ONCE” (the timer whose settings you want to clear).
e While “EVERYDAY” or “ONCE” is displayed, press the stop button (
2 ) and hold it in for at least 2 seconds. Those timer settings are cleared.
2 Quitting the timer setting (turning the operation of the timer off)
• Operate as described under “(3) Turning the everyday timer and once timer on and off” (page 85) and change the setting to the mode in
which neither the once timer nor the everyday timer are activated (“1off/Eoff”).
2 If there is a power failure)
• If there is a power failure or the power cord is unplugged from the power outlet, the time display flashes when the power comes back on.
Reset the current time.
• The once timer settings are deleted. Remake the settings.
• If the everyday timer settings and the tuner presettings have been deleted, reset them.
(5) About the everyday timer and once timer