Denon ADV-M71 - Manual (Page 106)

ENGLISH
106
(4) Edited recording (when the ADV-M71 and DRR-M31 are connected with a system cord)
• The tracks on the CD can be automatically divided into sides A and B for recording according to the length of the cassette tape (tape time). (For
CDs only)
• Edited recording is possible for CDs containing up to 25 tracks. For CDs with 26 tracks or more, editing is not possible.
1
2 Open the cassette holder, load the
cassette tape onto which you want to
record, then close the cassette holder.
Load the cassette tape with side A
facing up.
DRR-M31
Turn on the ADV-M71’s power.
• The system’s power turns on.
ON / STANDBY
ON
ADV-M71 Remote control unit
3 Press the FUNCTION button and switch the function to
“DVD”.
FUNCTION FUNCTION
ADV-M71 Remote control unit
4 Open the ADV-M71’s disc holder, load the CD, then close the
disc holder.
1 6 T r 5 6 : 0 0
ADV-M71
5 Press the MENU button on the
remote control unit and set the length
of the cassette tape onto which you
are going to record.
• For example, for a 60-minute
cassette tape, press the edit button
twice. (The length of the cassette
tape is the total time for sides A and
B.)
MENU
Remote control unit
The display switches as follows each time the MENU
button is pressed.
T a p e E d i t C - 6 0
About 4 seconds after setting the length of the cassette
tape, the numbers of the tracks to be recorded on side A
and the remaining time for side A on the cassette tape are
displayed.
(Ex.: When tracks 1 to 9 will be recorded on side A and the
remaining time for side A is 2 minutes 40 seconds)
E 0 1 - 0 9 A 0 2 : 4 0
After this, the display switches every few seconds
between the numbers of the tracks and remaining time for
side B and the numbers of the tracks and remaining time
for side A.
(Ex.: When tracks 10 to 16 will be recorded on side B and
the remaining time for side B is 1 minute 20 seconds)
E 1 0 - 1 6 B 0 1 : 2 0
If “OVER” is displayed for the remaining time, it is not
possible to record all the tracks. Change the cassette tape
length.
To set the cassette tape length to anything other than 46,
60 or 90, use the numeric keypad and +10 button on the
remote control unit while “ ” is displayed to input the
time. The time can be set to up to 99 minutes. The time is
input in the same way as when searching for CD tracks
directly.
[Example:] To set the time to 54 minutes
While “ ” is displayed, press , , , ,
, 4. +10
+10 +10 +10 +10
B
BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER ADV-M71
TONE / SDB
FUNCTION
MENU / SET
+ -
SURROUND / SELECT PUSH - PARAM.
VIRTUAL SPEAKER
4 6 4
1 3
ON / STANDBY CD SRS REC
DOLBY NR
ON OFF
0 1 PLAY
CD SRS
REC
REVERSE MODE
PLAY CASSETTE DECK DRR-M31
2 2
+
-
+
-
A / V
A-B REPEAT
SEARCH MODE
ON OFF
REPEAT RANDOM
CLEAR ZOOM SLIDE MODE
PROG/DIRECT
MEMO BAND MODE
STATUS
FUNCTION SURROUND INPUT MODE TEST TONE
DVD
TUNER
CH
3
- +
2 1
6 5 4
9 8 7
0 /10 CALL +10
SYSTEM MD
CDR TAPE
TUNER TV / VCR
VCR
NTSC/PAL SLEEP
ENTER
CD SRS
EDIT/MENU CHARAC.
REC TIME TITLE
TUNING / TV VOL
TV CH TV CH
TUNER DVD
MD/LINE-1 TAPE /LINE-2
AUTO DECODE
VIRTUAL DIRECT
5CH STEREO
STEREO
D.AUX
IN/SURR.
IN/SURR.
DVD
T V TV IN SOURCE
9 8
2 1
7 6
+
-
6
1
3
Main unit ADV-M71
Cassette deck (DRR-M31)
Example: Recording a CD with 16 tracks and a total playing time of 56
minutes onto a C-60 (60-minute) cassette tape
Edited recording
canceled