Denon ADV-M71 - Manual (Page 65)

ENGLISH
65
• The ADV-M71 is equipped with an on-screen display (“OSD”) function that displays various types of information on the surround functions and
the disc on the screen when the function is set to DVD.
q Setup screen
• This is used to select the speaker system being used (quick system setting) and to change the function of the ADV-M71 and various settings
when playing discs (system setting change and DVD setting change).
• The setup screen can be used regardless of the currently set function.
w Display of disc information
• When the function is set to DVD, the OSD displays information on the disc and appears when various playback functions are operated.
e Display of surround function
• When the function is set to DVD, information on the surround amplifier is also displayed and can be operated.
• The OSD for the surround function (AV OSD) can be turned on and off.
(The OSD for the setup screen and DVD disc information cannot be set to “OFF”.)
Set to “ON” upon shipment from the factory.
16 ON-SCREEN DISPLAY
B
BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER ADV-M71
TONE / SDB
FUNCTION
MENU / SET
+ -
SURROUND / SELECT PUSH - PARAM.
VIRTUAL SPEAKER
1 2
+
-
+
-
RC-936
A / V
3
A-B REPEAT
SEARCH MODE
ON OFF
REPEAT RANDOM
CLEAR ZOOM SLIDE MODE
PROG/DIRECT
MEMO BAND MODE
STATUS
RETURN
ANGLE AUDIO SUB TITLE
SETUP TONE /SDB
FUNCTION SURROUND INPUT MODE TEST TONE
DVD
TUNER
CH
3
- +
2 1
6 5 4
9 8 7
0 /10 CALL
ENTER
MUTING
+10
DISPLAY MENU TOP MENU
SYSTEM MD
CDR TAPE
TUNER TV / VCR
SURROUND PARAMETER CH SELECT
VCR
NTSC/PAL SLEEP
ENTER
CD SRS
EDIT/MENU CHARAC.
REC TIME TITLE
TUNING / TV VOL
TV CH TV CH
TUNER DVD
MD/LINE-1 TAPE /LINE-2
AUTO DECODE
VIRTUAL DIRECT
5CH STEREO
STEREO
D.AUX
- + VCR CH
IN/SURR.
IN/SURR.
DVD
T V TV IN SOURCE
9 8
2 1
7 6
+
-
1
2
1 With the function set to DVD, press the STATUS button of the
remote control for at least 2 seconds.
Press in the MENU/SET button on the main unit, then press
the MENU/SET button again for at least 2 seconds while
“STATUS” is displayed.
• “AV OSD ON 0 : 1 OFF” is displayed.
MENU / SET STATUS
Main unit Remote control unit
2 Turn the AV OSD on or off.
SURROUND / SELECT
PUSH - PARAM.
Main unit Remote control unit
or 0 :ON
or 1 :OFF
After several seconds, the display turns off and the setting is
made.
NOTES:
• Depending on the disc being played, the picture may be
disturbed when the OSD turns on. This is not a malfunction.
If this should happen, set the AV OSD to “OFF”.
• The OSD is also output to the VCR video output terminals.
Do not perform setup or OSD operations while recording with a
video deck.