Denon ADV-M71 - Manual (Page 105)

ENGLISH
105
(3) CD Ж Ж TAPE recording (when the ADV-M71 and DRR-M31 are connected with a system cord)
• CDs can easily be recorded onto cassette tapes.
[2] Synchronized CD recording
Perform the same operations as for steps 1 to 5 above.
y Press the CD synchronized recording
button on the cassette deck.
• Recording of the CD starts
automatically.
CD SRS
DRR-M31
Once all the tracks on the CD have been played, both the ADV-
M71 and cassette deck are automatically set to the stop mode.
Even if the entire CD has not yet been played, both the ADV-M71
and cassette deck are automatically set to the stop mode once the
cassette tape is full.
To stop synchronized recording, press the stop button (
2 ) on the
ADV-M71 or the cassette deck.
NOTES:
• Synchronized recording does not work when the ADV-M71 is
set to a function other than DVD.
• Synchronized recording does not work when in the programmed
play mode. When in the random play or repeat play mode, the
respective mode is canceled when synchronized recording
starts.
B
BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER ADV-M71
TONE / SDB
FUNCTION
MENU / SET
+ -
SURROUND / SELECT PUSH - PARAM.
VIRTUAL SPEAKER
7 3, e 3, e
1, q 2, w
Main unit (ADV-M71) Cassette deck (DRR-M31)
ON / STANDBY CD SRS REC
DOLBY NR
ON OFF
0 1 PLAY
CD SRS
REC
REVERSE MODE
PLAY CASSETTE DECK DRR-M31
5 , t 5 , t
y 6
+
-
+
-
A / V
3
A-B REPEAT
SEARCH MODE
ON OFF
REPEAT RANDOM
CLEAR ZOOM SLIDE MODE
PROG/DIRECT
MEMO BAND MODE
STATUS
FUNCTION SURROUND INPUT MODE TEST TONE
DVD
TUNER
CH
3
- +
2 1
6 5 4
9 8 7
0 /10 CALL
MUTING
+10
SYSTEM MD CDR TAPE
TUNER TV / VCR
VCR
NTSC/PAL SLEEP
ENTER
CD SRS
EDIT/MENU CHARAC.
REC TIME TITLE
TUNING / TV VOL
TV CH TV CH
TUNER DVD
MD/LINE-1 TAPE /LINE-2
AUTO DECODE
VIRTUAL DIRECT
5CH STEREO
STEREO
D.AUX
IN/SURR.
IN/SURR.
DVD
T V TV IN SOURCE
9 8
2 1
7 6
+
-
7
1 , q
2 , w
q
t
~
1 Turn on the ADV-M71’s power.
• The system’s
power turns on.
ON / STANDBY
ON
ADV-M71 Remote control unit
[1] Synchronized recording function
2 Press the FUNCTION button and switch the function to
“DVD”.
3 Open the ADV-M71’s disc holder, load
the CD, then close the disc holder.
ADV-M71
4 Check that the total number of tracks and total playing time
on the CD appear on the display.
Example: For a CD with a total of 16 tracks and a total playing
time of 53 minutes, 20 seconds
5 Open the cassette holder, load the
cassette tape onto which you want to
record, then close the cassette holder.
6 Press the recording button on the
cassette deck once to set the
recording standby mode.
1 6 T r 5 3 : 2 0
DRR-M31
7 Press the play/pause button on the ADV-M71 or the play
button on the remote control unit.
• Recording of the
CD starts
automatically.
FUNCTION FUNCTION
ADV-M71 Remote control unit
DVD
1
ADV-M71 Remote control unit
The recording standby mode is set once playback of the CD ends.
REC
DRR-M31