GAI-Tronics ITA2000A ITA2000A Series Tone Remote Adapter with Scanning User and Installation Manual - Manual (Page 27)

ITA2000A Series Tone Remote Adapter Installation
23 03/13
ITA2000A to RPG Radio Connection Chart
Adapter
Pin Adapter
Function
Wire Color Radio
Connector Pin
Radio Function
1 Channel steer 3 Black w/white stripe 6, 8, 9, 12, or 14 Programmable
2 CSQ Detect IN Blue w/white stripe 4, 8, 12, or 14 Programmable
3 RX audio + Green 11 RX audio
4 AGND Black 7 GND
5 Channel steer 2 White w/black stripe 6, 8, 9, 12, or 14 Programmable
6 PTT White 3 Mic PTT
7 Monitor Orange 14, or 6, 8, 9, 12 PL disable (monitor)
8 Channel steer 0 Red 6, 8, 9, 12, or 14 Programmable
9 Channel steer 4 Red w/white stripe 6, 8, 9, 12, or 14 Programmable
10 CTCSS IN Green w/white stripe 4, 8, 12, or 14 Programmable
11 RX audio − Connected internally to
15D pin 4 at radio end of
cable.
12 TX audio + Blue 2 Mic audio
13 PTT Sense IN Blue w/black stripe N/C
14 Monitor low Connected internally to
15D pin 4 at radio end of
cable.
15 Channel steer 1 Red w/black stripe 6, 8, 9, 12, or 14 Programmable
Connector
Housing Shield Connected internally to
15D pin 4 at radio end of
cable.
N
OTE : The radio must be programmed to disable emergency functions from pin 9.
RPG includes: DESKTRAC, GM300, M1225 (four-channel only).
WARNING
If programmable or N/C pins are not used, clip off or secure in a fashion to prevent leads from
shorting together, thus preventing damage to the adapter or the radio.
Adapter Radio Connector
Radio Connector