FSR ML-800 - Manual (Page 3)

ML-800 3
Operators Safety Summary
The general safety information in this summary is for operating personnel.
Do Not Remove Covers or Panels There are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous voltages. To
avoid personal injury, do not remove the top cover. Do not operate the unit without the cover installed .
Power Source This product is intended to operate from a power source that will not apply more than 230 volts rms between the supply conductors or
between both supply conductor and ground. A protective ground connection by way of grounding conductor in the power cord is essential for safe
operation.
Grounding the Product This product is grounded through the grounding conductor of the power cord. To avoid electrical shock, plug the power cord
into a properly wired receptacle before connecting to the product input or output terminals. A protective-ground connection by way of the grounding
conductor in the power cord is essential for safe operation.
Use the Proper Power Cord Use only the power cord and connector specified for your product. Use only a power cord that is in good condition. Refer
cord and connector changes to qualified service personnel.
Use the Proper Fuse To avoid fire hazard, use only the fuse having identical type, voltage rating, and current rating characteristics. Refer fuse
replacement to qualified service personnel.
Do Not Operate in Explosive Atmospheres To avoid explosion, do not operate this product in an explosive atmosphere.
Terms In This Manual
WARNING Highlights an operating procedure, practice, condition, statement, etc., which, if not strictly observed, could result in injury to or death of
personnel. NOTE Highlights an essential operating procedure, condition or statement.
CAUTION The exclamation point,or lighting bolt, within an equilateral triangle is intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literatureaccompanying the appliance.
AVERTISSEMENT! Le point d´exclamation dans un triangle equilatéral signale à alerter l´utilisateur qu´il y a des instructions d´operation et d´entretien
tres importantes dans la litérature qui accompagne l´appareil.
VORSICHT ein Ausrufungszeichen innerhalb eines gleichwinkeligen Dreiecks dient dazu,den Benutzer auf wichtige Bedienungs-und
Wartungsanweisungen in der Dem Great beiliegenden Literatur aufmerksam zu machen.
WARNING The rear panel ON/OFF switch does not disconnect the unit from input AC power. To facilitate disconnection of AC power, the power cord must
be connected to an accessible outlet near the unit. Building Branch Circuit Protection: For 115 V use 20 A, for 230 V use 8 A.
WARNING When the COMPASS is used in the 230-volt mode, a UL listed line cord rated for 250 volts at 15 amps must be used and must conform to IEC-
227 and IEC-245 standards. This cord will be fitted with a tandem prong-type plug.
Terms As Marked on Equipment
CAUTION Highlights an operating procedure, practice, condition, statement, etc., which, if not strictly observed, could result in injury to or death
of personnel.
CAUTION The exclamation point, or lighting bolt, within an equilateral triangle is intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literatureaccompanying the appliance.
AVERTISSEMENT! Le point d´exclamation dans un triangle equilatéral signale à alerter l´utilisateur qu´il y a des instructions d´operation et
d´entretien tres importantes dans la litérature qui accompagne l´appareil
VORSICHT Ein Ausrufungszeichen innerhalb eines gleichwinkeligen Dreiecks dient dazu, den Benutzer auf wichtige Bedienungs-und
Wartungsanweisungen in der Dem Great beiliegenden Literatur aufmerksam zu machen.
NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will
be required to correct the interference at the users own expense.