FSR ML-800 - Manual (Page 21)

22 ML - 800
SYSTEM SPECIFICATIONS
Audio
Frequency Response: 20 Hz – 20 kHz +/- .5 dB
THD: .03% @ 1kHz with MAX Rated Input Level
MAX Input level: +18 dBm
Noise Floor: -90 dBm
Conditions: Mixer Enables ON, Local Inputs ON, Nothing mixed, Inputs Open, Outputs
600 ohm terminated, Volume set to 0 dB
Volume preset: -6 dB
Crosstalk: -95 dB @ 1kHz, -78 dB @10 kHz Any Input to Any Output
Mic + Music Volume
Control Range: +10 dB to – 11 dB (Volume range adjustable from In-room controls)
Room Audio Inputs
Number and Type: 8 mono balanced
Connector used: 3 pin Phoenix
Impedance: 20k ohm
MAX Input Level: +18 dBm
Input Gain: 0 dB and +10 dB gain, dip switch selectable (SW 16 on CPU card)
Background Music Inputs
Number and Type: 4 mono balanced
Connector used: 3 pin Phoenix
Impedance: 20k ohm
MAX Input Level: +18 dBm
Trim level Adjust Range: -6 dB to +20dB
Paging Input
Number: 1 mono balanced
Connector used: 3 pin Phoenix
Impedance: 20k ohm
MAX Input Level: +18 dBm
Trim level Adjust Range: -6 dB to +20dB
Type: All Page with two priority levels; normal (n) and priority (p)
Output
Number and Type: 8 mono balanced
Connector: 3 pin Phoenix
Impedance: 50 ohms
MAX Level: +22 dBm into 600 ohms load
Power Input Ratings
100 /120 / 220 /240 VAC 50 /60 Hz Max 2A.
Expansion Ports
2 nine pin sub-D com ports for future use
Size
4 RU 19L x 7H x 11.5D inches Standard rack mounting with supplied rack ears.
Available Accessories
Membrane Wall Plate
Color Touch Wall Plate
AMX / Crestron Interface
Facility Manager Package