Fronius IG 15 - Manual (Page 34)

26
Display mode
„Day / Year /
Total“
Display mode „Day“ ... shows readings for mains supply feed-in of current
day - only in combination with bus-master option
Important! For the FRONIUS IG unit, the day begins with the moment it
switches on. In case the DC supply line is disconnected, the following
parameters will be re-set after repeating the start-up:
- power supplied (kWH)
- yield (currency can be selected)
- CO
2
-reduction (kg)
- maximum power supplied (Watt)
- maximum mains voltage(Volt)
- minimum mains voltage (Volt)
- energy drawn from mains supply (kWh)
- operating hours for FRONIUS IG unit
The information given above does not apply for the data recorder option.
If the data recorder option is available the display values listed always
apply for the whole of the mains supply feed day.
Display mode „Year“ ...shows readings of power supply for the current
calendar year (only in conjunction with data recorder)
Display mode „Total“ ...shows readings of power supply since original start
of operation of the FRONIUS IG unit.
- select display mode „Day“ / „Year“ / „Total“ (chapter „The Display“)
- the first display function of the display mode selected will appear
* optional - in case the required sensor card is not available, the mes-
sage „N.A.“ is displayed.