Foxconn Avenger User Manual
Page 65
58
4
4.2 User Created Patterns
You can create a new lighting pattern by yourself. The steps are :
Step 1. Click �Add Item�� button, then key in a pattern name to identify itself, click "OK" to
continue.
Step 2. Press �Add�� button to start creating a
new pattern. A grey, hori�ontal bar is displayed
at this moment, and you can select LED pattern
sets from Step 3.
Step 3. Click [Config] button, a picture of
motherboard with LEDs appears. You can then
click and select the LEDs from the picture, then
apply [Close] to finish the selection. One set of
LED pattern has just been created, and you can
repeat from step 2 to step 3 to generate more
sets, and all these sets will become one display
pattern.
For example, select any of two LEDs as one set
and total five sets are selected as one pattern.
You can then click �Simulation�� to preview the
pattern or click �Program�� to activate it. Five sets
of LEDs are displaying one after one, and this is
called one pattern.
Step 4. Click �Simulation�� button to preview the
currently selected pattern on screen picture.