Power-on function – Foxconn Avenger User Manual

Page 44

Power-on function

► Wake-Up by PCI Card

This item is used to set the system to wake up by PCI card.

► USB KB Wake-Up from S3

This item is used to set the system to wake up by USB equipment when it is in S3(Suspend to
RAM) mode.

► Power-On Function

This item is used to set the Power-On Function. The setting values:�Password��, �Hot Key��,
�Mouse Click��, �Any Key��, �Button Only��, �Keyboard 98��.

► KB Power-On Password

It will active when "Power-On Function" is set to "Password" value, Normally it is show only.
When enabled, it allows you to input a password to wake up the system from soft off and
green mode. This feature requires an ATX power supply.

► Hot Key Power-On

It will active when "Power-On Function" is set to "Hot Key" value, Normally it is show only.
This item allows you to press a �Ctrl�� + Function key to wake up the system from soft off and
green mode.

Phoenix - AwardBIOS CMOS Setup Utility

Power-On Function

Wake-Up by PCI Card

Disabled

Item Help

USB KB Wake-Up from S3

Disabled

Power-On Function

Button Only

KB Power-On Password

Enter

Menu Level ►

Hot Key Power-On

Ctrl-F1

↑↓��:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values

F7:Optimized Defaults

Disabled